A separate wire crimping connection system can make a contribution to a significant reduction in the wiring work man-hours.
This type provides an easy and economical way of wiring.
The I/O unit uses a 40-pin connector, which helps to significantly reduce the wiring work man-hours.
Up to 64 remote I/O stations can be connected
An interface block for connecting Mitsubishi Electric Corporation's Micro Sequencer (or PLC) "FX3U series" to the CC-Link (V.2 compatible)
This interface block is designed to connect an FX PLC to the CC-Link.
This is a CC-Link Ver.2 Interface Board.
It enables data communications between the computer and programmable controllers.
As a master or local station for the MELSEC CC-Link, the CNC MELDAS C64 for machining lines can be connected directly to a network
This is the Mitsubishi Intelligent Inspection Unit MELQIC IU2 Series CC-Link Communication Board.
Functioning as CC-Link’s master and local stations
It is a master/local module for MELSEC QnAS series PLC.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
It is a master/local module for MELSEC Q series PLC.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
The MELSEC L-series CPU has a built-in CC-Link function.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
Master/local station for MELSEC L-Series.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
This is a special function block for FX3G/FX3GC/FX3U/FX3UC PLCs.
Up to 8 remote I/O stations and 8 remote device stations / inteligent device stations can be connected to the master station.
(For an FX3G as master, maximum 4 remote I/O stations)
A CC-Link system can be constructed with an FX PLC.
It is a master/local module for MELSEC AnS series PLC.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
Товары 31 - 48 из 48
Начало | Пред. | 1 2 | След. | Конец
Контактное лицо